Descaling - Miele Steam oven Operating And Installation Instructions

Descaling

k
To avoid damage to your appliance, use only the Original
Miele descaling tablets.
Ensure that the descaling agent does not come into
contact with the metal control panel or the door handle as
this could cause marks. However, should any descaling
agent get onto these surfaces, wipe it away immediately.
The appliance will need to be descaled after a certain
number of operating hours. As a reminder, the descaling
symbol k and the number 10 will appear after switching the
appliance on. This means there are 10 programmes left
before the appliance needs to be descaled.
If you do not descale the appliance, a 9 will appear after the
next programme, and so on.
Once the reminder has reached zero, the appliance locks
out.
We recommend descaling the appliance before it locks out.
^ Touch and hold the s sensor until the k symbol and the
time "0:38 h" appear in the display.
^ Fill the water container with 1 litre cold water and add 2
Miele descaling tablets.
^ Push the water container into the appliance until it
connects.
^ Confirm with "OK".
The colon will start flashing and the k symbol will now light
up constantly. The descaling process will begin.
It is only possible to cancel the descaling process during
the first 6 minutes.
Do not switch the appliance off during the descaling
process. If if is switched off before the end of the process,
the whole process will have to be started from the
beginning again.
Cleaning and care
77