Processor Number Feature; Quick Power On Self Test - SOYO SY-7VCA2 User Manual

BIOS Setup Utility

3-1.4 Processor Number Feature

Setting
Processor Disabled
Number
Enabled
Feature
3-1.5 Vcore voltage Setup
Vcore voltage Setting Description
Setup
Vcore voltage Normal
Adjust
+1.5 %
+3.0 %
+4.5 %
+6.0 %
+7.5 %
+9.0 %
+10.0%

3-1.6 Quick Power On Self Test

Quick Power
On Self Test
Setting this item to enabled will allow
application programs to read the ID-
code in your Pentium III CPU,
disabling this item will not allow any
program to read the CPU ID code.
The CPU notifies the board of what core voltage
it requires by its VID outputs. The on-board
voltage regulator uses the VID code to set the
core voltage. If the Vcore Voltage Adjust is set to
normal, the Vcore will be exactly what the VID
code specifies. If an adjustment percentage is
selected the Vcore will be that percentage higher
than the VID code specifies. For instance the CPU
VID code specifies 2.0V and the Vcore Voltage
adjust is set to +10.0% the actual CPU Voltage
will be 2.2V. This function should only be used if
the CPU is running on FSB Frequencies beyond
the CPU specifications, note that SOYO does not
guarantee system stability if this item is not set to
normal.
Setting
Disabled
Enabled Provides a fast POTS at boot-up.
Description
Description
58
SY-7VCA2
Note
Default
Note
Default
Note
Default