Wolf L Series Installation Manual page 14

L Series Oven Installation
Verify Oven Operation
Unpack the box containing the oven components found in
each oven cavity. Install the oven rack guides onto the
shoulder screws located on the interior side walls of the
oven. Slide the oven racks onto the rack guides and place
the broiler pan in the oven.
Before operating the oven, be sure to read the entire
use & care guide included with the oven for important
safety, operating and warranty information.
Turn on the electrical supply to the oven. Set the time of
day by pressing the CLOCK touch pad, input the time by
using the number pads, then touch ENTER.
Select any of the ten cooking modes on the control panel.
Verify that the oven is coming up to temperature. For the
double oven, be sure to verify operation of both ovens.
IMPORTANT NOTE: A small amount of smoke and odor
may be noticed during the initial break-in period. Refer to
the L series built-in ovens use & care guide for additional
information.
Troubleshooting
IMPORTANT NOTE: If the L series oven does not operate
properly, follow these troubleshooting steps:
• Verify that electrical power is being supplied to the
oven.
• Check the electrical connections to ensure that the
installation has been completed correctly.
• Refer to the troubleshooting guide in the L series
built-in ovens use & care guide.
• If the oven still does not operate properly, contact a
Wolf authorized service center. Do not attempt to repair
the oven yourself. Wolf is not responsible for service
required to correct a faulty installation.
14