Kenmore 141.1686 Owner's Manual page 13

Installing Ice Bucket and Insulation Bucket (Cooler
Body Assembly) to left Side Shelf
1. Place the stainless steel Ice Bucket into the left
Side Shelf.
2. From underneath the left side shelf, install the
Insulation Bucket to the bottom of Ice Bucket. See
Fig 9d.
3. Install the Strainer Body through the hole on the
bottom of the Cooler Body Assembly. Fix firmly
from below using the rubber washer and Shank Nut.
4. Snap the cap to the end of Strainer Body.
5. Place the stopper into the Strainer Body.
Figure 9d
_STOPPER
I
_ STRAINER
BODY
BUCKET
SIDE SHELF
i
I
_ INSULATION BUCKET
RUBBER WASHER
SHANK NUT
CAP
13