Asus P2B-F User Manual page 22

4. Secure the SEC Cartridge: Secure the SEC cartridge in place by pushing the
SEC cartridge locks outward so that the lock protrudes through the retention
mechanism's lock holes.
(3)
5. Secure the Heatsink: Install the heatsink support base into the motherboard.
This is not, however, necessary if you use a heatsink with fan (see next page).
The support base is necessary to secure the heatsink (without fan). Secure the
heatsink by sliding the heatsink support top bar into the bottom groove of the
heatsink until it locks into the heatsink support base posts.
Heatsink support
base (7)
6. Heat Sensor Connectors (optional): If you purchase the specially designed
thermal monitor heatsink and thermal monitor power supply, you can connect
the heat sensor cable to the motherboard's heat sensor connector.
P2B-F Heat Sensor Connectors
22
III. INSTALLATION
Heatsink support
top bar (4)
Power Supply Heat Sensor Connector
ASUS P2B-F User's Manual
(3)
(8)
Heatsink support
base post
JTPWR
JTCPU
CPU Heat Sensor Connector
(9)