Picture; Sound - Philips 39PFL1707 User Manual

Picture

You can adjust the picture settings according to your personal
preference. These settings are automatically stored after exiting the
picture menu.
1
Press and use ◄► to select
PICTURE
Move Menu
2
Use ▲▼◄► to select the item you want to adjust, then press
OK.
to select the desired setting, then press OK
Picture Mode
(Dynamic, Standard, Mild and Personal)
Cursor ◄
Contrast
to decrease contrast
Brightness
to decrease brightness
Color
to decrease color intensity
Tint
to add red
Sharpness
to soften
Color
to select the desired setting, then press OK
Temperature (Cool, Medium and Warm)
Noise
to select the desired setting, then press OK
Reduction (Off, Low, Middle and High)
Dynamic
to select the desired setting, then press OK
Contrast (On and Off)
Note
•
You can change Picture Mode easily using P.MODE on the remote control. Press
P.MODE repeatedly to select the picture mode you want. In this function, you can also
assign the picture mode individually to each input mode.
•
You can adjust Contrast, Brightness, Color, Tint and Sharpness, if you set Personal in
Picture Mode.
•
While adjusting each setting of Picture Mode, Contrast, Brightness, Color, Tint and
Sharpness, you can change the setting item using ▲▼.
PICTURE).
(
Picture Mode Standard
Contrast 50
Brightness 50
Color 50
Tint 50
Sharpness 30
Color Temperature Medium
Noise Reduction Middle
Dynamic Contrast Off
Enter Exit
Cursor ►
to increase contrast
to increase contrast with
green
to increase color intensity
to add green
to sharpen

Sound

You can adjust the sound settings according to your personal
preferences.
1
Press and use ◄► to select
SOUND
Move Menu
2
Use ▲▼◄► to select the item you want to adjust, then press
OK.
to select the desired setting, then press OK
Sound Mode
(Standard, Music, Movie, Sports, and Personal)
Cursor ◄
Treble
to decrease treble
Bass
to decrease bass
to decrease right speaker
Balance
volume level
to reduce volume differences between the TV
On
commercials and the programs
Auto Volume
Off
to remove the auto volume leveling
On
to set on the surround mode
Surround
Sound
Off
to set off the surround mode
The SPDIF output is the same with the input sound
Auto
format.
SPDIF Mode The SPDIF output is PCM format, regardless of the
PCM
input sound format.
Off
Turn OFF the SPDIF output.
Note
•
You can adjust Treble and Bass settings, if you set Personal in Sound Mode.
•
While adjusting each setting of Sound Mode, Treble, Bass and Balance, you can change
the setting item using ▲▼.
SOUND).
(
Sound Mode Standard
Treble 50
Bass 50
Balance 0
Auto Volume Off
Surround Sound On
SPDIF Mode PCM
Enter Exit
Cursor ►
to increase treble
to increase bass
to decrease left speaker
volume level
17
English