Switching channels
To select Channels by using PROG. ▲/▼ or CH + / −
•
Touch PROG. ▲(up) / ▼(down) on the control panel or press
CH + / − on the remote control.
To select Channels by using the NUMBER buttons
Analog/Cable TV operation
– When selecting cable or Analog channel 11
Note
•
To select the non-memorized channels, use the NUMBER buttons.
•
No Signal will appear on the TV screen after the subchannel broadcast is over.
Watching channels from an external device
Switching Each Input Mode can easily switch with the remote control
between TV and external devices when they are connected to the unit.
1
Turn On a set-top box or the connected device.
• The picture from your set-top box or the connected device
might appear automatically on the TV screen.
If the picture does not appear
Press
SOURCE repeatedly or use ▲▼ to select the input mode
you want, then press OK.
Input Source
Favorite
You can easily locate a favorite channel.
1
Press FAV while watching a program to show the favorite channel
list.
2
Use ▲▼ to select the channel you want, then press OK.
Favorite List
1 TF1 HD
2 France 2 HD
6 M6HD
Note
•
Use CH + / − to move to the previous or next page.
•
You can set favorite channel at Programme Edit.
•
This unit need few seconds to memorise the favorite setting.
•
If you unplug the AC power cord immediately after the setting, It will not be registered
in the memory.
ATV
AV
YPbPr
HDMI
PC
Media
OK
Enter
ATV
ATV
ATV
OK
13
English