Charcoal Water Filter - Cuisinart SS-780PC Instruction Booklet

8. Making sure your mug is in place, press
the Brew button to start a cleansing
cycle (unit will dispense approximately
8 oz. of water). The control panel will
display BREWING, as well as the factory
default brew size (see figure 5). When
cycle is complete, dispose of the hot
water.
note: Do not use a K-Cup
cycle.
the one-time set-up
process is complete.

Charcoal Water filter

Your coffeemaker comes with a charcoal
water filter that eliminates chlorine, bad
tastes and odors from tap water.
Charcoal Water Filter
inserting the Water filter
1. Remove the filter and filter holder from
the polybags.
2. Soak the filter, fully immersed in cold
tap water, for 15 minutes.
3. Press down on the filter compartment
and pull toward you to open.
4. Place the filter into the holder and
snap it closed. Be careful – improper
placement can tear the filter skin
(see figure 6).
for this
®
Charcoal Water Filter
holder
figure 6
5. Flush the filter by running fresh water
through the hole in bottom of
compartment for 10 seconds.
6. Allow the filter to drain completely.
7. Place the assembled water filter
holder into the water reservoir,
pushing it down to fit into place (see
figure 7).
Water Reservoir Lid
note: We recommend changing the
water filter every 60 days or after 60 uses,
and more often if you have hard water.
Replacement filters can be purchased in
stores, by calling Cuisinart Customer
Service, or at www.cuisinart.com.
9
figure 5
Charcoal
Water Filter
Water
Reservoir
figure 7