Vertex Standard Spirit VXA-700 Operating Manual page 55

3. Power On Beep
Function: Selects the Power-on beep.
Available Values: Off/Mode 1/Mode 2/Mode 3
Default Setting: Mode 1
4. ARTS Beep
Function: Selects the beep option during ARTS opera-
tion.
Available Values: On/Off
Default Setting: On
3. R
ECEIVE
1. SQL
Function: Sets the Squelch threshold level for the AM
and FM Narrow modes.
Available Values: 0 - 8
Default Setting: 2
2. WSQL
Function: Sets the Squelch threshold level for the Wide
FM mode.
Available Values: 0 - 8
Default Setting: 1
VXA-700 S O
PIRIT PERATING
( "S " ) M
M
ENU ET
3. Resume
Function: Selects the Scan Resume mode.
Available Values: 5secs/Busy
Default Setting: 5secs
5secs: The scanner will hold for 5 seconds, then resume
Busy: The scanner will hold until the signal disappears,
4. DW/PRI
Function: Selects the Dual Watch/Priority Function.
Available Values: DW/PRI
Default Setting: DW
5. RX Save
Function: Selects the Receive-mode Battery Saver "sleep"
ratio.
Available Values: ABS/1:1/1:2/1:3/1:4/1:5/Off
Default Setting: ABS
The setting of "1:5" will promote the greatest conserva-
tion of battery capacity, but the receiver's response time
to incoming calls will be slowed somewhat.
ABS: Automatic Battery Saver, based on activity on the
Note: This feature cannot be activated during Scan or Dual
Watch/Priority operation.
M
ANUAL
ODE
whether or not the other station is still transmitting.
then will resume when the carrier drops.
receiver.
53