Use The 'Print Quality' Wizard - Oce ColorWave 300 User Manual

Use the 'Print quality' wizard

Use the 'Print quality' wizard
Introduction
The printer user panel contains the 'Print quality'('Optimize print quality') wizard that
helps you to correct the problems with the output quality. The wizard performs the fol-
lowing actions.
Detect weak or failing nozzles.
The Océ ColorWave 300 automatically compensates the detected nozzles in future
prints to make sure that print quality is optimal.
Align the printheads and optimize the paper transport.
During the 'Print quality' wizard, the system performs an alignment. The alignment re-
quires the use of media. Make sure at least one roll of the following defined media:
'Paper 70-80g'
'Paper 90g'
'Coated paper 90-130g'
'High qual. coated paper 120-170g'
'Coated paper 24 lb'
'Coated paper Japan'
'Photo gloss (instant dry)'
'Paper 24 lb'
'Recycled paper 70-80g'
'Recycled paper 20 lb'
is loaded before you enter the 'Print quality' wizard.
Note:
You can start the 'Print quality' wizard from the printer user panel.
When to do
Before you start the 'Print quality' wizard, first check the following.
Did you use the correct media type?
Did you use the correct print mode?
Only start the wizard when you are sure that you used the correct media type and the
correct print mode, and the output quality is still not satisfactory.
252 Chapter 6 - Ensure the best output quality