6.
The warm up mode can be re‑activated by turning off and re‑starting the engines.
Gear Shifting
DTS PANEL MOUNT REMOTE CONTROL
IMPORTANT: Never shift outboard into gear unless engine speed is at idle. Do not shift outboard into forward or
reverse when the engine is not running.
•
The outboard has three gear shift positions to provide operation. Forward (F), Neutral (N) and Reverse (R).
•
When shifting, always stop at neutral position and allow the engine speed to return to idle.
•
Panel mount remote control requires the operator to always press shift lock while moving the control handle
out of the neutral position.
•
Advance the control lever to further increase speed.
DTS CONSOLE MOUNT REMOTE CONTROL
IMPORTANT: Never shift outboard into gear unless engine speed is at idle. Do not shift outboard into forward or
reverse when the engine is not running.
•
The outboard has three gear shift positions to provide operation. Forward (F), Neutral (N) and Reverse (R).
OPERATION
N
F
50
R
3427
3428