Removing The Terminal Board; 3-Pole Terminal Board - Electrolux Built-in ovens Service Manual

2.4.4 - REMOVING THE TERMINAL BOARD

The terminal board for the electrical connections is pressure-fitted into its housing.
To remove the terminal board, use a screwdriver to pry open the anchor tab (see Fig. 51
and Fig. 53).

2.4.4.1 - 3-POLE TERMINAL BOARD

Fig. 51
1 - TERMINAL BOARD
2 - ANCHOR TAB
Fig. 52
1 - TERMINAL BOARD
2 - ELECTRICAL CONNECTIONS
(see Fig. 55)
3 - EARTH CONNECTION
4 - POWER SUPPLY CABLE
5 - CABLE CLAMP
6 - FIXING SCREWS FOR
CABLE CLAMP
SOI 02.10 FV 28/142 599 70 59-01