Removing The Hob Assembly - Electrolux Built-in ovens Service Manual

4 - Unscrew the 2 gas connection support bracket fixing screws (see Fig. 241).
Fig. 241
1 - GAS RAMP
2 - GAS CONNECTION
SUPPORT FIXING
BRACKET
3 - FIXING SCREW -
SUPPORT FIXING
BRACKET
4 - GAS SUPPLY
CONNECTION
5 - TORX SCREWDRIVER

2.17.7 - REMOVING THE HOB ASSEMBLY

To remove the hob assembly:
1 - Remove the control protection box by unscrewing the 4 fixing screws (see chapter
2.17.2).
2 - Remove the 4 ramp fixing screws (see chapter 2.17.6).
3 - Remove the 2 gas connection fixing screws (see chapter 2.17.6).
4 - Extract the hob assembly
Fig. 242
1 - HOB ASSEMBLY
2 - IGNITION
MICRO SWITCH
ASSEMBLY
SOI 02.10 FV 116/142 599 70 59-01