Advertisement
Keg
j.
Support
REPLACING
EMPTY KEG
Close shutoff valve on CO2 regulator then remove keg tappel
from empty keg. To tap a new keg, follow the procedures
C, D
and E of "Installing
Keg Tapper and Beer Keg."
Cabinet
Bottom
(1) Lift to upright
i
/
/
I
/
(2) Slide into cabinet.
Fig. 3
OPERATION
Place drip tray under
beer faucet. To dispense
beer, open
beer
faucet quickly all the way. If you have any trouble with beer, refer to
"Draught
Beer Facts"
book.
The recommended
pressure
for the CO2 system is 8-10 Ibs.
CLEANING
1.
To maintain
good-tasting
beer, periodical
cleaning
of beer
system
is required.
Complete
cleaning
kit is provided
for
your
convenience.
Refer
to the instructions
included
in
cleaning
kit.
2.
To clean cabinet
inside and outside,
mix 2 tablespoons
baking
soda with 1 quarter warm water, or use mild soap. Never use
strong cleanser,
scouring
powder or pads.
Do not put the drip tray in dishwasher,
it is not dishwasher
safe.
Vacuum the tubing on outside
back twice a year.
To provide protective
care of the painted finish:
Regular applications
of wax or polish provide vital protection
against
rust. Waxing
cleans
the surface
and seals out moisture
and other
contaminants.
Use a wax or polish that is suitable for appliances.
Apply the wax or polish when the refrigerator
is new and then at
least twice a year.
Between
waxings,
clean the cabinet
with the same polish
or
with a CLEAN
soft cloth dampened
with a mild household
de-
tergent.
Rinse with a CLEAN
lightly dampened
cloth and DRY
thoroughly.
Advertisement
