Final Fitting; Customer Care - Stanley Supreme Deluxe 1100 Induction G5 User Manual & Installation & Service Instructions

Final Fitting

Fitting the 2-piece Plinth
Fit the inner plinth to the bottom front of the cooker using
the 5 screws provided (3x M5 screws in the lower edge, 2x
No.8 screws in the each end) (Fig.7-13).
Loosen the 2 screws in the front of the inner plinth.
Locate the 2 slotted brackets on the inside of the outer plinth
onto the 2 screws (Fig.7-14). Using a suitable screwdriver
through the slots in the outer plinth, tighten the 2 screws to
secure.
The height of the outer plinth can be adjusted by loosening
the 2 retaining screws and sliding it up or down to suit and
then retightening the screws.
Note: To aid the tting of the outer plinth we advise that you
open the doors when locating the 2 slotted brackets.
Fitting the Splashback
Position the splashback on the rear of the hotplate and secure
with the screws supplied.

Customer Care

Installer: Please complete your details in this Guide, inform
the user how to operate the cooker and hand over the
instructions.
Thank you.
Check the appliance is electrically safe when you have nished.
INSTALLATION
Inner plinth
Outer plinth
29
M5 (large screw)
No.8 (smaller screw)
Inner plinth
Fig.7-13
Fig.7-14