Philips AZ3856 User Manual page 26

Cd soundmachine
Hide thumbs Also See for AZ3856:
Table of Contents

Advertisement

If you encounter problems when using this apparatus, check the
following points before requesting service. If the problem remains
unsolved, go to the philips web site (www.philips.com/support), or
contact philips (see Contact information). When you contact philips,
ensure that the apparatus is nearby and the model number and serial
number are available.
No power
Ensure that the Mains cord is connected securely.
Ensure that there is power at the AC Mains.
Ensure that the batteries are inserted correctly.
No sound or poor sound
Adjust the volume.
Check that the speakers are connected correctly.
Check if the stripped speaker wires are clamped.
Left and right sound outputs reversed
Check the speaker connections and location.
No response from the unit
Disconnect and reconnect the AC power plug, then turn on the
system again.
As a power-saving feature, the unit switches off automatically 15
minutes after track play reaches the end and no control is operated.
Cannot record/play tape
Clean deck parts.
Use only NORMAL tape.
Apply a piece of adhesive tape over the missing tab space.
Remote control does not work
Before you press any function button, first select the correct source
with the remote control instead of the main unit.
Reduce the distance between the remote control and the unit.
Insert the battery with its polarities (+/– signs) aligned as indicated.
Replace the battery.
Aim the remote control directly at the sensor on the front of the
unit.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents