Siemens RWB27 Timeswitch Installation And Operating Instructions Manual page 6

7 Day Programming instructions for the
RWB27 Controls
UP & DOWN
MENU/SELECT
Introduction
This leaflet will give you easy to follow instructions to allow you to
set your RWB27 Timeswitch to the 7 Day, (different times every
day) program.
Contents
• How do I change/set the clock?
• How do I change/set the ON/OFF times?
• How do I review the current ON/OFF times?
• How do I copy the ON/OFF times?
• How do I select my Switching Options?
• What do the switching options mean?
• How do I change summer and winter times?
• How do I set my holiday program?
• How do I activate my holiday program?
• What do the buttons do?
To commence programming first press the reset button using a
ballpoint pen or similar tool the display should show as next page.
To make it easier to follow the buttons you should be using are
coloured grey.
RWB27 7 Day
Mon Tue
Thu Fri Sat
Display will flash as shown at first installation
How do I change/set
the day and clock?
• Press top middle button
display shows
• Alter day using +/-
buttons to scroll, when correct day
is shown press left hand button
ENTER display shows
• Alter time using +/- buttons,
when correct time is shown press
left hand button ENTER, press right
hand button BACK then press right
hand button again EXIT
display shows
Siemens RWB27 Timeswitch.
ON
WHEN LIT
EXTEND
ADVANCE
RESET
BACK/EXIT
Wed
12:00
Sun
PM
2P
Mon
12:00
PM
SET THE DAY
ENTER + /-
BACK
Mon
12:00
PM
SET THE TIME
ENTER + /-
BACK
Mon
3:37
PM
CH
OFF
MAN
MENU
How do I change/set the
ON/OFF times?
• Press left hand button MENU
• Press top middle button
until SET PROGRAM is shown
• Press left hand button SELECT,
SET MONDAY will be shown, press
SELECT again display will show
To change 1st ON time press
SELECT, time will flash, change
times by using +/- , when
desired time is in the display press
ENTER display will show
• Repeat as above until last OFF
time is entered display will show
SET MONDAY, Press top middle
button display will show SET
TUESDAY, repeat as above until
all days and times are entered,
display will show SET SUNDAY (or
whatever day you finish on)
press right hand button BACK then
right hand button press EXIT to
return to MENU
How do I review the current
ON/OFF times?
• Press left hand button MENU
• Press top middle button
until REVIEW PROG is shown
• Press left hand button SELECT
display shows
press bottom middle button
until day you wish to review is
shown
• Press left hand button VIEW
• Display shows
• Press top middle button
1st OFF will be shown, continue
pressing this button until all
times have been reviewed
• Press right hand button BACK,
Repeat above for all days you
wish to review
display shows
• Press right hand button BACK
twice, then press right hand
button EXIT again to return to
MENU
3:37
PM
CH OFF
MAN
MENU
3:37
PM
CH OFF
MAN
SET PROGRAM
SELECT EXIT
Mon
AM
CH
8:30
SET 1st ON
SELECT BACK
Mon
AM
CH
8:30
SET THE TIME
ENTER + /-
BACK
3:37
Mon
PM
AM
CH
10:30
SET 1st OFF
SELECT BACK
Sun
SET SUNDAY
SELECT BACK
Mon
3:37
PM
CH OFF
MAN
MENU
3:37
Mon PM
REVIEW PROG
SELECT EXIT
Mon
MONDAY
VIEW BACK
Mon
AM
CH
8:30
VIEW 1st ON
BACK
Mon
AM
CH
10:30
VIEW 1st OFF
BACK
Sun
AM
CH
10:30
VIEW 2nd OFF
BACK