Mixer - Pioneer DDJ-SX Operation Manual

A. MIXER
1. CROSSFADER: Blends audio between the left and right channels.
2. CROSSFADER ASSIGN: Assign each deck on the left or right side of the
crossfader, or alternatively bypass the crossfader entirely (thru)
3. VOLUME: Alter the sound of each deck. While SHIFT is held down, the VOLUME
faders will stop the deck at the previously selected Cue point when these reach the
minimum level (zero) and will start the deck (synced to the other deck) if those move
from the zero position. (Fader Start)
4. PFL: Press this button to send this channel's pre-fader signal to the Cue Channel for
monitoring. When engaged, the button will be lit. Press SHIFT and then one of the
PFL buttons to manually tap the tempo of the loaded track.
5. FILTER: Applies a High Pass/Low Pass Filter on the track (middle position is Off
position).
VirtualDJ 8 – Pioneer DDJ-SX 6