Table of Contents
Advertisement
Other speaker setup options
∫ Attaching to a wall
You can attach all of the speakers to a wall.
1
Drive a screw (not included) into the wall.
2
Fit the speaker securely onto the screw(s) with the hole(s).
≥The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg per screw. Consult a qualified building
contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.
Front and surround speakers
∫ Fitting speaker stands
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance between screws as shown in the diagram.
≥The stands must be able to support over 10 kg.
≥The stands must be stable even if the speakers are in a high position.
e.g.
Attach the stands to these
metal screw holes.
RQT8291
26
Downloaded from
www.Manualslib.com
In this position, the
speaker will likely
fall if moved to the
left or right.
(not included)
Front and surround speakers
5 mm, pitch 0.8 mm
Plate thickness plus 7 mm to 10 mm
manuals search engine
‰3.0–4.0 mm
Move the speaker
so that the screw is
in this position.
60 mm
Speaker stand
(not included)
30–35 mm
‰7.5–9.4 mm
4.0–7.0 mm
Wall or pillar
Center speaker
90 mm
Hide quick links:
Advertisement
Table of Contents
