Manually Connect To A Wlan Network - Partner Tech International OT-110 User Manual

Manually connect to a WLAN network

A wireless network can be added manually by entering the settings information to add the network. Contact
your network administrator to determine if authentication information is needed before trying to connect to a
WLAN network.
To manually connect to a WLAN network:
1. Turn on the WLAN.
2. Double tap
taskbar.
3. Select the Wireless Information
tab.
4. Tap Add New...
5. Set the properties.
6. Enter the SSID.
• To use data encryption, select
an encryption method from the
Encryption list.
• To use authentication, select the
authentication method from the
Authentication list.
7. Tap the OK button.
40 C H A P T E R 2 L E A R N I N G T H E B A S I C S
or on the
Enter network
key if necessary