Paper Registration - Brother DCP-9045CDN Reference Manual

3.3.3 Paper Registration

The front-edge position of a sheet of paper after separation by the separation roller is detected
by the T1 registration front actuator. Then, the paper is fed further for a certain time, and its
front edge hits the stopped registration roller so that the paper skew is corrected. After such
correction, the registration roller is rotated in the normal direction and the paper is carried to the
belt unit.
T1 registration front
actuator
<Operation of Actuators>
- The T1 registration front actuator detects the passage of paper.
- The registration rear actuator adjusts the starting position for writing on a sheet of paper.
Pinch roller
Separation roller
Fig. Ref2-15
Ref. 2-13
Registration rear actuator
Belt unit
Registration roller
Confidential