Chart Ranging And Panning - Raymarine a series Installation And Operation Instructions Manual

Navionics chartplotter sync connection
You can wirelessly synchronize waypoints and routes between
the multifunction display and a tablet or smartphone device.
1
1. Multifunction display.
2. Wi-Fi connection.
3. Tablet / smartphone.
4. Navionics Marine app.
To use this feature you must first:
• Download and install the Navionics Marine app, available from
the relevant app store.
• Enable Wi-Fi in the System Settings on the multifunction
display.
• Enable Wi-Fi on your tablet / smartphone.
• Select the Raymarine Wi-Fi connection from the list of
available Wi-Fi networks on your tablet / smartphone.
Chart application
2 3 4
D12166-2

15.2 Chart ranging and panning

Ranging in and out
The table below shows the Range controls available for each
display variant.
Rotary Control
Range in and Range
out buttons
Range in and Range
out on-screen icons
Panning the chart
You can pan the chart area on a touchscreen multifunction
display by following the steps below.
In the chart application:
1. Swipe your finger across the screen from right to left to pan
right.
2. Swipe your finger across the screen from left to right to pan
left.
3. Swipe your finger across the screen from top to bottom to
pan up.
4. Swipe your finger across the screen from bottom to top to
pan down.
Panning the chart
You can pan the chart area on a non-touchscreen multifunction
display by following the steps below.
From the chart application:
1. Move the Joystick in the direction you want to pan.
• New c Series
• New e Series
• RMK-9 keypad
• New c Series
• New e Series
(excluding e7 and
e7D
• RMK-9 keypad
• New a Series
• New e Series
• gS Series
Note: New e
Series and gS
Series onscreen
range controls
can be enabled
and disabled from
the homescreen:
Customize
> Display
Preferences >
Range Controls
155