Table of Contents
Advertisement
Making Calls
1. Pick up the handset from the base.
2. Press P. The LED on the handset will flash while
the handset is scanning for a clear channel. The
LED will glow steadily when the connection is
made. Wait until you hear a dial tone.
3. Dial the number you wish to dial.
4. When you are finished talking, press the P key or
place the unit back into the base to end the call.
Note: The "CHARGE/IN USE" light on the base will
turn green when the line is active.
Receiving Calls
When you hear the phone ring:
1. If the handset is in the base, lift the handset from
the base. The handset will turn on. There is no
need to push the P key if the unit is in the base
when the call comes in.
2. If the handset is off the base, push P.
3. When you are finished, push P or place the
handset back in the base.
Redialing
1. Press P, once the IBM-3415 has acquired a line,
press F to redial the number last dialed.
To Receive a Call Waiting Call
Press G to go to the new caller
•
Press G again to go back to the original caller
•
BASIC OPERATION
16
Talk Key
1
GHI
4
PQRS
7
TONE
Redial Key
REDIAL
IN USE
VOLUME
2
ABC
3
DEF
JKL
MNO
5
6
TUV
WXYZ
8
9
OPER
0
#
FLASH
Flash
Advertisement
Table of Contents
