BASE
Note: This unit can be desk or wall mounted.
1. Insert the pedestal into the slots on the bottom of the base and slide up to lock in place.
The pedestal is reversible for desk or wall mounting.
2. Connect the telephone line cord to the "TEL LINE" jack and to a telephone outlet.
3. Connect the AC power adapter to the 9V DC jack and to an AC outlet.
4. Raise the antenna vertically.
Note: Use only the supplied AC power adapter. Do not use any other AC power adapter.
Connect the AC power adapter to a continuous power supply. Place the phone close
to the AC outlet so that you can plug in the AC power adapter easily.
Tip:
If your telephone outlet is not modular, contact your telephone service company for
assistance.
TELEPHONE SETUP
Connecting the Phone to the Wall Jack
PEDESTAL
Use only with class 2
Power Source 300mA
P/T
DC-9V
11
TEL LINE