Reinstall Grease Drip Rail And Baffle Filters - Broan Elite EPD61 SERIES Installation Instructions Manual

10. CONNECT WIRING (
Connect cable into electrical compartment
using provided waterproof wire connectors.
Connect BLACK to BLACK, WHITE to WHITE
and GREEN or bare wire under GREEN ground
screw.
Reinstall electrical compartment cover.

11. REINSTALL GREASE DRIP RAIL AND BAFFLE FILTERS

Reinstall grease drip rail. The illustration at right shows
how to reinsert the grease drip rail into the range hood.
Remove protective plastic film covering filters before installing them.
It is recommended to install side filters first and finish with center one(s).

Insert front end of the filter into the upper channel of the hood.

Raise the other end toward the inside of hood and insert in the grease drip rail of the hood.
1
HD0473
' )
CONT D
HE0138
CAUTION
8
HD0472
2