Cd, Fm Radio & Line In; Loading A Cd; Playing A Cd; Programming A Cd - iLive IHB613B User Manual

CD, FM Radio & Line In

Loading a CD

Open the Disc Door.
1.
2. Place a CD into the unit,
label side facing up.
Close the Disc Door.
3.

Playing a CD

1. Follow the instructions
for Loading a CD.
2. Press the Source button to
switch to CD mode.
Press the Play/Pause button to
3.
begin playing the loaded CD.

Programming a CD

1. Follow the instructions for
Loading a CD and Playing a CD.
Press the Stop button to
2.
stop the CD during play.
3. Press the Program button
on the remote.
4. Use the Skip/Search buttons to
enter the desired track number.
5. Repeat step 3 until the desired number
of CD tracks are programmed.
Press the Play/Pause button
6.
on the remote to begin playing
the programmed tracks.
Customer Support: 1-888-999-4215
IHB613-781-01-IB.indd 11

Playing the Radio

Press the Source button to
1.
switch to FM Radio mode.
2. Press the Tune+/- buttons to tune
the radio. Press and hold to search
for the next available station.

Radio Reception

Adjust the position of the antenna
to improve FM radio reception.

Saving a Radio Station as a Preset

1. Follow the instructions for
Playing the Radio.
2. Press and hold the Memory button
on the remote or the unit.
3. Press the Tune+/- buttons on the
remote to select a preset number.
Up to 20 stations may be preset.
4. Press the Memory button to save the
current station to the selected preset.

Tuning to a Saved Preset Station

1. In FM Radio mode, press the
Repeat/Mem+ button to cycle
through saved presets.

Using the Line input

Requires a 3.5mm audio
cable (not included)
1. Connect a 3.5mm audio cable
to the 3.5mm Audio Input and
the audio output on an MP3
player or other audio device.
Press the Source button to
2.
switch to Line In mode.
3. Use the native controls on
the connected MP3 player or
other audio source to play your
audio through the unit.
11
3/7/2013 2:07:19 PM