Cd/Radio/Line In; Loading A Cd; Playing A Cd; Programming A Cd - iLive iHB603B User Manual

CD/Radio/Line In

Loading a CD

Note: This unit is not compatible with MP3 CDs.
1. Open the Disc Door by pressing the Open button.
2. Place a CD into the unit, label side facing up.
3. Close the Disc Door.

Playing a CD

1. Follow the instructions for Loading a CD.
2. Press the Source button to switch to CD mode.
3. Press the Play/Pause button to begin playing the
loaded CD.

Programming a CD

1. Follow the instructions for Loading a CD and
Playing a CD.
2. Press the Stop button to stop the CD during play.
3. Press the Prog button on the remote.
4. Use the Skip/Search buttons to enter the
desired track number. Press the Prog button
to set the track.
5. Repeat step 3 until the desired number of CD
tracks are programmed.
6. Press the Play/Pause button on the remote to
begin playing the programmed tracks.
10

Tuning and Playing the FM Radio

Note: This unit is equipped with an internal FM antenna.
Adjust the position of the unit to improve radio reception.
1. Press the Source button to switch to FM
Radio mode.
2. Press the Tune+/- buttons to tune the radio. Press
and hold to search for the next available station.

Programming and Playing Radio Presets

1. Follow the instructions for Playing the Radio.
2. Press the Prog button on the remote.
3. Press the Tune+/- buttons on the remote to select
a preset number.
4. Up to 10 stations may be preset.
5. Press the Prog button to save the current station
to the selected preset.
6. In FM Radio mode, press the Mem+ button to
cycle through saved presets.

Using the Audio Input (Line In)

Requires a 3.5mm audio cable (not included)
1. Connect a 3.5mm audio cable to the Line In
and the audio output on an MP3 player or other
audio device.
2. Press the Source button to switch to Line In
mode.
3. Use the controls on the connected MP3 player or
other audio source to play your audio through
the unit.