Chapter 3 Matters Needing Attention; Safety - Haier HW70-1202D Service Manual

SERVICE MANUAL
HW70-1202D HW60-1202D
HW60-1002D HW50-1202D

Chapter 3 Matters needing attention

3-1. Safety

BEFORE SWITCHING THE APPLIANCE ON FOR THE FIRST TIME
DO ...
... Make sure that the transportation bolt(T1,T2&T3) are
removed.
... Use a separate earthed socket for the power supply.
... Make sure that the plug is accessible.
... Hold the plug and not the electric cable when
unplugging the power supply.
... Make sure that the fuses in the power circuit are rated
for 13A.
... Keep away from heat sources and direct sun light to
prevent plastic and rubber components from aging.
... Make sure that the power cord is not caught under or
in the appliance and avoid damage to the power cable.
... Check that hose joints and connections are firm and no
water can leak. If joints are loose or there is leakage,
turn off the water supply and refix. Do not use the
washing machine until the hoses are properly fixed.
DO NOT ...
... Touch or use the appliance when barefoot or with wet or
damp hands or feet.
... Use flammable detergent or dry cleaning agent.
... Use any flammable sprays in close vicinity to the
appliance.
... Remove or insert the plug in the presence of flammable
gas.
... Allow children or infirm persons to play with the appliance
or packing materials.
... Install the appliance outdoors in a damp place, or in an
area which may be prone to water leaks such as under or
near a sink unit. In the event of a water leak allow the
machine to dry naturally.
... Place the washing machine directly on a carpet, or close to
a wall or furniture.
Front Load Washing Machine