Error Displays - Panasonic AG-HMR10P Operating Insructions

Screen displays (continued)
■
N
NO CARD
No card is inserted.
NOW ACCESSING.
PLEASE DO NOT REMOVE CARD.
Card is currently being accessed. Do not remove
the card.
■
R
REC STOPPED.
NOW WRITING.
Video recording has been stopped. Data is now
being written onto the card.
REPAIR CLIP?
Do you want to repair clips now?
REC WARNING
IRREGULAR FRM SIG.
• Displayed when an abnormality is detected in the
signal that is input to the portable recorder when
recording SDI input.
Recording resumes when the input signal returns
to normal. "Resumption of recording" (warning
display) can be canceled by pressing the [REC/
PAUSE] button.
REPEAT REC COMPLETED
REPEAT REC operation has stopped.
REPEAT REC STOPPED
INPUT ERROR
TURN POWER OFF
REPEAT REC operation has stopped.
An input error has occurred, so the power must
be switched off.
■
S
SD CARD FORMAT?
YES NO
Do you want to format the SD Memory Card now?
Yes/No
SDI INPUT ERROR.
(OTHER FORMAT)
• Displayed when the format of the SDI input signal is
different from the recording format of the portable recorder.
SET DATE AND TIME
Set the clock.
80
■
T
THE CLIP IS PROTECTED.
PLEASE CANCEL PROTECTION.
The clip is protected. Cancel the protection.
THE RECORDING IS STOPPED
(OVER THE LIMITATION)
The recording will stop. (Continuous recording for 12 hours)
THE TC MODE IS CHANGED TO "NDF"
NDF is selected as the TC mode setting.
(Displayed when [SYSTEM FREQ] is set to [59.9Hz])
THIS BATTERY CANNOT BE USED.
The battery currently inserted into the portable
recorder cannot be used.
THIS CARD CANNOT RECORD IN VIDEO
MODE.
The card cannot be used for video recording.
THUMBNAIL DATA ERROR IS DETECTED.
An error has been detected in the thumbnail information.
■
U
UNABLE TO FORMAT.
The card cannot be formatted.
■
W
WRITE PROTECT
The card is write-protected.

Error displays

The following messages are displayed when an
error occurs in the portable recorder or the SD
Memory Card. If the problem is not solved by
switching the power off and back on again, either
change the card in accordance with the instructions
displayed, or consult the place of purchase.
■
C
CANNOT RECORD
Displayed when an error has occurred during recording.
■
R
REC WARNING
Displayed when an error has occurred during
recording. Start the recording again. If the message
appears again, consult the place of purchase.
• Switch the power off if the message continues to appear.
Try inserting a different SD Memory Card if the
message appears again after restarting recording.