Digits Format (Advanced); Nmea 0183 Output (Advanced) - Humminbird 698ci HD SI Combo Operation Manual

Digits Format adds a tenth decimal place to the readouts such as Temperature
and Depth. Use the settings to change the display of the decimal place or
remove it from the digital readouts. Examples of the different settings are
displayed below. Also, see Select Readouts and Views.
Small tenths
NMEA 0183 Output turns the NMEA* output on or off. NMEA Output should
be turned On if you connect the NMEA Output wires of the GPS Receiver cable
to another NMEA-compatible device, such as an autopilot.
*NMEA 0183 is a National Marine Electronics Association standard for data
communication.
NOTE: A separate purchase of accessory AS-HHGPS may be required for the
NMEA output function.
The following NMEA sentences are output when NMEA 0183 Output is
turned On:
DPT- Depth
MTW - Water Temperature
GLL - Lat/Lon Position
GGA - GPS Fix Data
RMC - Recommended Minimum Specific GNSS Data
VTG - Course Over Ground and Ground Speed
ZDA - Time and Date
Setup Menu Tab
Digits Format
(Advanced)
Settings: Small tenths, Large tenths, No tenths;
Default = Small tenths
Large tenths
NMEA 0183 Output
(Advanced)
Settings: Off, On; Default = Off
166
No tenths