Print Mode; Indicator Lights - Oki MICROLINE 320 Turbo Handbook

Print Mode

In its normal operating state, your printer's front panel is in the Print Mode.

Indicator Lights

In the Print Mode, your printer has the following lights to indicate its status:
2
SEL
SEL
MENU SHIFT
EXIT
POWER ALARM
1 3
1. POWER light: Glows whenever printer is on.
2. SEL light: Glows when printer is selected, ready to receive data. Flashes when
printer is in print suppress mode. Goes out when printer is deselected (can't re-
ceive data).
3. ALARM light: Glows when error condition exists, such as out of paper or paper
jam. Also glows when paper lever is set to wrong position.
Important!
If the ALARM light is blinking, an unrecoverable error condition exists.
Try turning the printer off, then on again; if the light is still flashing, contact your
service dealer (see Chapter 5 for more information on obtaining service).
4. QUIET light: Glows when printer is in QUIET state (printer selected or deselected).
ML320/321 Turbo Printer Handbook
LF FF/LOAD TEAR
Micro Feed Micro Feed
Down Up
GROUP ITEM SET
MENU
4
PRINT QUALITY
PARK QUIET
TOF
CHARACTER PITCH
PRINT
RESET
HSD UTL
NLQ SSD
10 12 15
17 20 PROP
25