Setting The Virtual Server"S Services - LevelOne FBR-2000 User Manual

Setting the Virtual Server's services
Step 1.
For the Virtual Server which has already been set up with an IP address, click the
New Service button in the table.
Step 2.
In the Virtual Server Configurations window:
 Server Virtual IP: displays the WAN IP address assigned to the Virtual Server
 External Service Port: select the port number that the virtual server will use.
Changing the Service will change the port number to match the service.
 Service: select the service from the pull down list that will be provided by the
Virtual Server.
 Internal Server IP：The internal server IP address mapped by the virtual server.
Four computer IP addresses can be set at most, and the load can be maintained
in a balance.
Step 3.
Enter the IP address of the LAN network server(s), to which the virtual server will
be mapped. Up to four IP addresses can be assigned at most.
Step 4.
Click OK to save the settings of the Virtual Server.
Note: The services in the drop-down list are all defined in the Pre-defined and Custom
section of the Service menu.
- 129 -