Sound Effects; External Equipment; Others; Maintenance - Panasonic SC-HC29DB Operating Instructions Manual

Sound effects

1
Press [SOUND] repeatedly to select the sound
effect.
2
Press [R, T] to select the setting and then press
[OK].
PRESET EQ "HEAVY", "SOFT", "CLEAR", "VOCAL" or
"FLAT"
BASS –4 to +4
TREBLE –4 to +4
D.BASS "ON D.BASS" or "OFF D.BASS"
SURROUND "ON SURROUND" or "OFF SURROUND"
Note:
The default setting is underlined. Changed settings will be
kept until it is changed again, unless otherwise indicated.

External equipment

You can play music from a portable audio equipment.
Preparation
• Switch off the equaliser (if any) of the portable audio
equipment to prevent sound distortion.
• Decrease the volume of the system and the portable
audio equipment before you connect or disconnect the
portable audio equipment.
Audio cable
(not supplied)
1
Connect the portable audio equipment.
Plug type: Ø 3.5 mm stereo (not supplied)
2
Press [RADIO/AUX] to select "AUX".
3
Play the portable audio equipment.
To adjust the input level
1
Press [SOUND] repeatedly to select "INPUT LEVEL".
2
Press [R, T] to select "NORMAL" or "HIGH" and
then press [OK].
Note:
• The default setting is "NORMAL".
• Select "NORMAL" if the sound is distorted during "HIGH"
input level.
• Read the operating instructions of the portable audio
equipment for details.
• Components and cables are sold separately.
12
Portable audio
equipment
(not supplied)

Others

Auto off
This system automatically switches off when you do not
use it for approximately 20 minutes.
1
Press [SETUP] repeatedly to select "AUTO OFF".
2
Press [R, T] to select "ON" and then press [OK].
To cancel, select "OFF".
Note:
• This function does not work when you are in radio source
®
or when a Bluetooth device is connected.
•
For the United Kingdom and Ireland
This function does not work when you are in DAB/DAB+
source.
®
Bluetooth standby
This function automatically switches on the system when
you establish a Bluetooth
device.
1
Press [SETUP] repeatedly to select
"BLUETOOTH STANDBY".
2
Press [R, T] to select "ON" and then press [OK].
To cancel, select "OFF".
Charging a portable device
This system can supply power to a portable device, such
as Android™ smartphone, connected to the USB port.
Note:
• Use a cable compatible with the device.
• Use the charger supplied with the device if power is not
supplied to the device.
• Do not use a cable or connect a device that exceeds the
rated value of 5 V, 1.5 A.
• Examine the screen of the device to check if charging is
complete. Disconnect the device after charging.
• Depending on the device, power may not be supplied to it.
• Read the operating instructions of the device for details.
Checking the software version
1
Press [SETUP] repeatedly to select "SW VER." and
then press [OK].
The software version is shown.
2
Press [OK] again to exit.

Maintenance

To clean this system, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this
system.
• Before using chemically treated cloth, read the
instructions that came with the cloth carefully.
connection from a paired
®