Table of Contents
Advertisement
nokia
C
P
ONNECTING
EOPLE
Nokia Mobile Phones Customer Care EMEA
Technical Services, Repair Concepts
6. DISASSEMBLY INSTRUCTIONS (ALSO SEE VIDEO CLIPS)
Do not open the unit, if you don't have a torque driver, which is capable of
40 Ncm, but send the product to the appropriate
Attention!
It is not allowed to open the unit more than once,
otherwise the unit is not splash proofed any more
and has to be sent to Level 3/4 service partner.
Always use new screws for assembly.
(SB-006 for NPM-6)
To remove the A-Shell press Locking Springs as shown
and pull A-Shell from the unit.
Separate the UI-Module from Radio Module carefully,
because of the board-to board-connector.
Service Manual 5100 Level 1&2
PAGE 11 (20)
Confidential
service partner with higher service level.
Press the grip markings on both sides of the B-Shell and
remove B-Shell.
Unscrew the six screws, using the order shown and a
screwdriver TORX PLUS® size 6.
order has to be used. For screws around Display a
torque of 40Ncm and for Connector screws a torque of
25Ncm have to be used.
Use tweezers to remove Vibra Motor.
Copyright 2002-2003 © Nokia Corporation
Approved 1.0
SQX 00591-en DJk
10.02.2003
For assembly, the reverse
Advertisement
Table of Contents
