Table of Contents
Advertisement
Replacing the Lamp
1.
Turn off the power on the remote control to STBY. In 3 minutes,
press the power button to off on the front panel and unplug the
power cord.
(Allow the lamp to cool for 30 minutes before replacing it.)
2. Remove the 2 retaining screws on the lamp cover with a "+" type
screwdriver then separate the lamp cover from the TV.
3. Remove the two retaining screws on the lamp case by using "-"
type screwdriver.
4. Lift up the fixed wire knob on the lamp.
5. Pull out the knob slowly and remove the lamp case.
6. Insert the new lamp gently into the correct position. Make sure it
is inserted correctly.
7. Tighten the screws you removed in step 3.
8. Replace the lamp cover and tighten the cover screws.
(If the lamp cover is open, the lamp indicator flashes green and
the TV will not turn on.)
Note :
- Only use LG approved lamp replacement.
- Using incorrect type of lamp may cause damage to the
TV or lamp.
- Make sure the lamp cover is securely fastened. If the lamp cover
is open, the TV will not turn on.
Reset Lamp Time
* You must reset lamp time on the menu after replacing the lamp.
* In some models, the lamp time may not be reset.
1. Press the OK or enter button on the front panel and MUTE
button on the remote control simultaneously (About 5 seconds).
2. Press the VOLUME (
3. Press the OK or enter button.
Lamp time will be reset.
G
) button.
lamp case Screws
Screws
Knob
Lamp Use Time Reset Menu
Lamp Use Time
100
Total Lamp Use Time 11011
Lamp Use Time Reset
G
Cancel
EXIT
Reset
Reset the Lamp Use Time?
Cancel
Reset
EXIT
Hide quick links:
Advertisement
Table of Contents
