Manual Presetting (Fm/Am) - JVC KD-R412 Instructions Manual

Manual presetting (FM/AM)

You can preset up to 18 stations for FM and 6
stations for AM.
Ex.: Storing FM station of 92.50 MHz into preset
number "04."
1
] "92.50MHz"
2
[Hold]
"PRESET MODE" flashes.
3
] Selects preset number "04."
"P04" flashes and "MEMORY" appears.
Selecting a preset station
1
or
2
The following features are available
only for FM Radio Data System stations.
Searching for your favourite
FM Radio Data System
programme—
PTY Search
You can tune in to a station broadcasting your
favourite programme by searching for a PTY
code.
1
[Hold]
The last selected PTY code appears.
2
] Select one of your favourite
programme types or a PTY code (
and start searching.
If there is a station broadcasting a
programme of the same PTY code as you
have selected, that station is tuned in.
Standby receptions
TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from
any source other than AM.
• The volume changes to the preset TA volume
level if the current level is lower than the
preset level ( 15).
To activate TA Standby Reception
If the TP indicator lights up, TA
Standby Reception is activated.
If the TP indicator flashes, TA
Standby Reception is not yet
activated.
• To activate the reception, tune in to another
station providing Radio Data System signals
required for TA Standby Reception.
• To deactivate the reception, press T/P BACK
again.
17),
ENGLISH 7