Table of Contents
Advertisement
1. Q
UICK
1.1 S
U
ETTING
P THE
1.2 P
S
OWER
WITCH
1.3 V
S
OLUME
LIDER
1.4 H
EADPHONES
1.5 D
S
EMO
ONGS
12
S
TART
P
IANO
The first thing you'll need to do before playing the piano is to set up the
instrument.
ASSEMBLING THE STAND
First, you need to assemble the stand unit. Assemble the stand following
the instructions at the beginning of this manual.
SUPPLYING AC POWER
The CE200 piano is equipped with stereo speakers and an amplifier. You
do not need any other equipment to play your piano. You can enjoy the
CE200 piano wherever AC power is available. Simply connect the power
cable that comes with the CE200 piano to an AC outlet.
Connect the AC power cable to the piano's power jack and the
other end of the cable to the AC outlet on the wall.
Press this button to turn on the power.
Pressing it again will turn off the power.
Pressing this button while holding down the REC and PLAY/STOP buttons
will erase all the songs currently stored in the Recorder. (See page 26.)
This slider controls the master volume level of the piano's sound.
Move this slider to the right to increase the volume and move to
the left to decrease the volume.
This slider also controls the headphone's volume and the LINE output
level of the piano's sound.
For private performances you may want to use the headphones. The
speakers will be turned off automatically when the headphones are
plugged in, and the CE200 piano will only be heard through the
headphones. The CE200 piano has two headphones jacks.
The CE200 has 18 built-in sound demo songs. Each of the demo songs
presents a musical piece to introduce the different preset sounds.
KAWAI DIGITAL PIANO CE200
Advertisement
Table of Contents
