Kawai CONCERT ARTIST CA63 Owner's Manual page 92

section
Assembly Instructions
4. Connecting the pedal and power cables
Pass the pedal cable (extending from the back of the pedal
board) behind the back board, and through the aperture to
the front of the main body.
Connect the pedal cable to the PEDAL terminal on the base of
the main body, ensuring the notched plug faces the rear of the
instrument.
When disconnecting the pedal cable, press and
hold the notch and pull the plug gently.
Connect the power cable l to the AC IN terminal on the base
of the main body, then pass the cable through the back board
aperture, and out to the rear of the instrument.
The illustration below shows the location of the PEDAL and AC
IN terminals on the underside of the main body.
PEDAL
With the pedal and power cables connected, attach the two
cable clamps k to the rear of the left and right side panels,
then fix the cables in place to tidy their appearance.
5. Attaching the headphone hook (optional)
A headphone hook is included with the CA93/CA63 digital
piano and can be used to hang headphones when not in use.
If desired, attach the headphone hook to the underside of the
main body using the two tapping screws provided.
6. Adjusting the pedal support bolt
Turn the pedal support bolt anti-clockwise, extending the
bolt until it makes contact with the floor and supports the
pedals firmly.
When moving the instrument, always adjust or
remove the pedal support bolt, then readjust
when the instrument is in its new position.
92
(CA63 only)
Front
Rear
AC IN
Power cable
Attach the cable clamps,
fix the cables in place
Turn the bolt
Pedal cable