Function Of Remote Control - LG ATNC186ELAA Service Manual

Function of Remote Control

Function of Remote Control
1. Wireless LCD Remote Control(Ceiling & Floor models)
5
4
7
8
9
2
Heat Pump
Model
Cooling Model
16 Universal System Air Conditioner
Signal Fransmitter
Wall Mounted type
Cassette Type
ON OFF
SET CANCEL
1
START/STOP BUTTON
Operation starts when this button is pressed and stops
(Chaos)
when the button is pressed again.
2
OPERATION MODE SELECTION BUTTON
Used to select the operation mode.
3
ROOM TEMPERATURE SETTING BUTTONS
(Auto)
Used to select the room temperature.
4
INDOOR FAN SPEED SELECTOR
Used to select fan speed in four steps low, medium, high,
or CHAOS.
6
5
JET COOL
1
Used to start or stop the speed cooling. (Speed cooling
operates super high fan speed in cooling mode.)
3
6
CHAOS/AUTO SWING BUTTON
10
Used to stop or start louver movement and set the desired
11
up/down airflow direction.
12
7
ON/OFF TIMER BUTTONS
13
Used to set the time of starting and stopping opera-
tion.
8
TIME SETTING BUTTONS
Used to adjust the time.
9
TIMER SET/CANCEL BUTTONS
Used to set the timer when the desired time is
obtained and to cancel the Timer operation.
10
SLEEP MODE AUTO BUTTON
Used to set Sleep Mode Auto operation.
11
AIR CIRCULATION BUTTON
Used to circulate the room air without cooling or
heating (turns indoor fan on/off).
12
ROOM TEMPERATURE CHECKING BUTTON
Used to check the room temperature.
13
RESET BUTTON
Used prior to resetting time or after replacing batter-
ies.