Lower Octave Shift; Lower Pedal On/Off; Layer Octave Shift - Kawai CA-X Owner's Manual

9. LOWER OCTAVE SHIFT

10. LOWER PEDAL ON/OFF

11. LAYER OCTAVE SHIFT

30
This allows the octave of the lower part to be be shifted up one, two, or
three octaves higher when you use the split function.
Press the PAD button while holding down the TOUCH and the
TRANSPOSE buttons.
The display alternatively shows "Lot" (= Lower Octave) and a number
which represents how many octaves the lower part is shifted up.
Use the VALUE buttons to set the desired lower octave shift range.
Lower Octave Shift can be set between 0 to 3.
This determines if the pedals will be active for lower sound when in SPLIT
mode. The default setting is off which means the pedals are not active for
lower sound.
Press the BASS button while holding down the TOUCH and the
TRANSPOSE buttons.
The display alternatively shows "LPd" (= Lower Pedal) and on/off status.
The default is off.
Use the VALUE buttons to toggle on and off.
This allows the octave of the layered part to be be shifted up or down
when you use the dual function.
Press the EFFECT button while holding down the TOUCH and the
TRANSPOSE buttons.
The display alternatively shows "LAo" (= Layer Octave) and a number
which represents how many octaves the layered part is shifted up or down.
Use the VALUE buttons to set the desired layer octave shift range.
Layer Octave Shift can be set between -2 to 2.
KAWAI DIGITAL PIANO CA-X