Led Indications; Ethernet Led Indication; Initial Boot Process; Normal Run Time Leds - NEC Electra Elite IPK Installation And Maintenance Manual

Document Revision 1
___________________________________________________________________________________
2.5
___________________________________________________________________________________
1 - 6

LED Indications

2.5.1

Ethernet LED Indication

ON
OFF
FLASHING
2.5.2

Initial Boot Process

All LEDs, except for Live (DS3), will light solid during the boot up
process. Once the SPE(M)-U( ) ETU finishes the boot up process all
LEDs will go out momentarily. Live (DS3) LED will remain flashing.
2.5.3

Normal Run Time LEDs

Live LED
Off = Indicates problem
On = Indicates problem
Flashing = Normal
STAT LED
On = When SPE ETU initialization is completed and was
successful
Flashing = Error during Initialization.
LED 1
Off = SMDR Idle, No Flash ROM write occurring
On (Stays ON and does not go out) = Flash ROM write
Error
Flashing (momentarily ON) = Outputting SMDR Records
via COM 2 of KSU or TCP Connection / Writing to Flash
ROM
LED 3
Off = No SPE Application connection or LAN PC
Programming
On = SPE Application connected or LAN PC
Programming
Flashing = State not used
Green Yellow
Link 100M bps
Detected
No Link 10M bps
Detected
Activity N/A
Electra Elite IPK SPE(M)-U( ) ETU
Electra Elite IPK