DSC PC6010 User Manual page 11

Or, Turn Area(s) On Anyway
If you want to continue to turn on your area(s) with the listed zones open, or in fault,
press
Warning-Security
Reduced
If you see this message, you can continue to turn your area(s) on, but you should tell
a Supervisor or Master user about the problem zones.
The keypad displays:
Press (YES) to
Confirm...
To continue turning on your area(s), go to step 6.
To stop turning on the area(s), go to step 7.
Step 6. To turn on your area(s) with the zone(s) open, press
Warning
Confirmed
The system will turn on the area(s). If you have turned on the area you are in, the
keypad displays:
Please Leave
Now...
The keypad counts down the exit time. Leave the area through your entry/exit door.
Step 7. To stop turning on the area(s), press
System Will Not
Turn Areas On!
To turn on other areas, go back to step 1.
Report the problem zones to a Supervisor or Master user.
. The keypad displays the following message:
120
then
. The keypad displays:
. The keypad displays:
Turn ON All
Your Areas?
9
2: Turning Your Area(s) ON and OFF