Engine Failure In Flight - Cirrus SR20 Information Manual

Section 3
Emergency Procedures

Engine Failure In Flight

1. Best Glide Speed ........................................................ ESTABLISH
2. Mixture ................................................................... AS REQUIRED
3. Fuel Selector ........................................................ SWITCH TANKS
4. Fuel Pump.......................................................................... BOOST
5. Alternate Induction Air............................................................... ON
6. Air Conditioner (if installed) ......................................................OFF
7. Ignition Switch ........................................................ CHECK, BOTH
8. If engine does not start, proceed to Engine Airstart or Forced
Landing checklist, as required.
Amplification
If engine failure is accompanied by fuel fumes in the cockpit,
or if internal engine damage is suspected, move Mixture
Control to CUTOFF and do not attempt a restart.
If the engine fails at altitude, pitch as necessary to establish best glide
speed. While gliding toward a suitable landing area, attempt to identify
the cause of the failure and correct it. If altitude or terrain does not
permit a safe landing, CAPS deployment may be required. Refer to
Section 10, Safety Information, for CAPS deployment scenarios and
landing considerations.
3-8
• WARNING •
Cirrus Design
P/N 13999-004 Info Manual
September 2011
SR20