Mobile Software Programming - Siemens C55/2128 Service Manual

SIEMENS Pte Ltd
C55/2128 Level 2 Service Manual

11 MOBILE SOFTWARE PROGRAMMING

The common mobile software available is divided into language groups. However, this
software does not contain the specific settings, such as ringing tones, greeting text, short
dial list etc., required by the operator(s) or service provider(s). Therefore, it is not
uncommon to have some menu item(s) differ in different variants or are not visible at all.
These settings are stored in different memory area of the mobile and will be activated
depending on the customer specific model or variant of the phone by a separate test
step during the production process.
Due to this separation of common mobile software and customer specific initialization, it
is possible to fulfill the demands of the market requiring customization and flexibility. As
a consequence the software programming process in the LSO is divided into two
different steps as followed:
- Software update to actual version and appropriate language group
- Programming of CUSTOMER SPECIFIC INITIALIZATION
FIGURE 2.24 C55 SERIES SOFTWARE PROGRAMMING SETUP
Copyright © Siemens Pte. Ltd.
All rights reserved
ICM MP CCQ ASP/ASC
Siemenes Techincal Support Center
15 of 28
Internal Service Use Only