Yamaha SY85 Owner's Manual page 62

2.
Press [RUN]
Press the [RUN] key to call the step record display:
3.
Set the Velocity
The velocity of the notes to be entered is set via the "NORM" (PROGRAM
[4]), "ACC1" through ACC3" (PROGRAM [5] through [7]), and "FIX" (PRO-
GRAM [8]) keys. The actual velocity values of the accents — "ACC1" through
"ACC3" — can be set via the UTILITY SEQ SETUP mode SEQUENCER
cent screen, described on page 220 of the Feature Reference manual. If the
"Fix" parameter is set to "kbd", then "kbd" will appear on the display when
you press the FIX (PROGRAM [8]) key, and the notes will be entered at the
velocity with which they are played on the keyboard.
4.
Select the Desired Note Length
Select the note length for the first note by pressing the corresponding
GROUP key (standard notes are displayed above the keys), or by incrementing/
decrementing using the [-1] and [+1] keys. Dotted notes, triplets, and ties are
entered in the same was as they are in the song step record mode (page 53).
5.
Enter the Required Notes and Rests
When you've selected the required note length, play the key corresponding
to the instrument to be entered on the keyboard. The cursor will move to the
beginning of the next note.
Ac-
5. The Sequencer
59