Table of Contents
Advertisement
Installing Modules
The DES-7000 and DES-7100 Switch chassis' has one DES-7003 management/uplink module
installed when shipped. In order to use other available modules you will need to install them. Follow
the instructions below. Modules can be installed into any free slot, except the CPU module.
WARNING
Unpacking and Setup
DES-7000/DES-7100 Layer 2 Switch User's Guide
When handling Switch modules be sure to wear an ESD wrist
strap or suitable grounding device to prevent damage from
electrostatic discharge. Do not attach the strap to any part of the
power supply if the Switch is powered on.
Figure 2 - 3. Inserting a module into the DES-7000
Figure 2 - 4. Inserting a module into the DES-7100
11
Advertisement
Table of Contents
