Working With Detergents - Kärcher K 2.7 Operator's Manual

Detergents can only be applied at
low pressure (Min.).
STEP 1:
"
Install the vario power spray wand.
Set the spray wand to the low pres-
sure setting (Min.).
STEP 2:
"
Fill a container with Kärcher deter-
gent. Place the filter end of detergent
suction tube into the container.
STEP 3:
"
Turn on the pressure washer (I).
Pull trigger to operate unit:
Liquid detergent is drawn into the
unit and mixed with water. Apply de-
tergent to work area. Do not allow
detergent to dry on surface.
STEP 4:
"
Always draw fresh water through the
detergent suction tube when done,
to rinse/flush any remaining deter-
gents from the injection system.

WORKING WITH DETERGENTS

For best results see Cleaning Tips
for specific information on how to
clean different surfaces.
Always Use Kärcher Detergent for
Best Results
Kärcher biodegradable detergents are
specially formulated to protect the envi-
ronment and your pressure washer. The
special formula won't clog the suction
tube filter and will protect the internal
parts of the pressure washer for a long-
er life. For Kärcher Detergents, check
your retailer or visit our website:
www.karcher-usa.com
The following Kärcher detergents are
available:
One Gallon ready to use
All Purpose & Vehicle Cleaner
!
Deck Wash
!
Heavy Duty Degreaser
!
House Wash
!
CAUTION
Never use:
– Bleach, Chlorine products and other
corrosive chemicals
– Liquids containing solvents (i.e.,
paint thinners, gasoline, oils)
– Tri-sodium phosphate products
– Ammonia products
– Acid-based products
These chemicals will harm the unit and
will damage the surface being cleaned.
9
English