D White Balance - FujiFilm Finepix S2500HD Series Basic Manual

D WHITE BALANCE

D
WHITE BALANCE
For natural colors, choose a setting that matches
the light source (for an explanation of "white bal-
ance," see the Glossary on page 115).
Option Option
AUTO White balance adjusted automatically.
h
Measure a value for white balance.
i
For subjects in direct sunlight.
j
For subjects in the shade.
k
Use under "daylight" fl uorescent lights.
l
Use under "warm white" fl uorescent lights.
m
Use under "cool white" fl uorescent lights.
n
Use under incandescent lighting.
If AUTO does not produce the desired results (for
example, when taking close-ups), select h and
measure a value for white balance or choose the
option that matches the light source.
1 Notes
• At settings other than h, auto white balance is used
with the fl ash. Lower the fl ash (pg. 27) to take pic-
tures at other settings.
• Results vary with shooting conditions. Play pictures
back after shooting to check colors in the monitor.
Description Description
Using the Menus: Shooting Mode
■ ■ h h : Custom White Balance
: Custom White Balance
Choose h to adjust white
balance for unusual lighting
conditions. The options at
right will be displayed; frame
a white object so that it fi lls
the monitor and press the shutter button all the
way down to measure white balance.
If "COMPLETED!" is displayed, press MENU/OK to set
white balance to the measured value. This value
can be reselected by pressing MENU/OK when cus-
tom white balance options are displayed.
If "UNDER" is displayed, raise exposure compensa-
tion (pg. 33) and try again.
If "OVER" is displayed, lower exposure compensa-
tion and try again.
2 Tip
To give a deliberate color cast to your photographs,
measure a value for custom white balance using a col-
ored instead of a white object.
CUSTOM WB CUSTOM WB
SHUTTER SHUTTER NEW WB NEW WB
NOT CHANGE NOT CHANGE CANCEL CANCEL
77