Troubleshooting - Hoover CHALLENGER User Manual

Maintenance
Important
All filters should be checked regularly for signs of damage, preferably after each cleaning task. The filters
must be replaced immediately if they become damaged. Always disconnect the vacuum from the
electrical outlet when checking the filters.
Recycling
This product bears the selective sorting symbol for waste electrical and
electronic equipment (WEEE).
This means that this product must be handled pursuant to European Directive 2002/96/EC in order
to be recycled or dismantled to minimize its impact on the environment.
For further information, please contact your local or regional authorities.
Electronic products not included in the selective sorting process are potentially dangerous for the
environment and human heath due to the presence of hazardous substances.

Troubleshooting

Problems and solution
If you come across a problem, please use the checklist of troubleshooting tips before ringing
Hoover Customer Care.
Fault Treatment
The cleaner will not turn on.
Check that the power cable is inserted securely; remove from
the power supply and then reinsert into the power supply.
Check that the on/off switch is in the "ON" position.
The vacuum performance is Check the appliance to ensure there are no blockages.
deteriorating.
Clear any blockages that may be found.
Check that the dust bin filter sponge is not dusty; frequently
clean or replace dust bin and air-outlet HEPA filters.
The cleaner makes an abnormal Turn off the cleaner immediately.
sound when switched on.
Check the appliance to ensure there are no blockages.
Please clear any blockages that may be found.