Taillamps, Turn Signal, Stoplamps And Back-Up Lamps - Chevrolet Colorado 2005 Owner's Manual

Taillamps, Turn Signal, Stoplamps
and Back-up Lamps
To replace one of these bulbs, do the following:
1. Open the tailgate. See Tailgate on page 2-10 for
more information.
A. Stoplamp/Taillamp
B. Turn Signal/Taillamp
C. Back-up Lamp
3. Pull out the lamp assembly.
4. Turn the bulb socket counterclockwise to remove it
from the taillamp housing.
5. Pull the old bulb straight out from the socket.
6. Press a new bulb into the socket and turn the socket
clockwise into the taillamp housing until it is tight.
7. Reinstall the rear lamp assembly and tighten the
screws.
2. Remove the two rear
lamp assembly screws
near the tailgate
latch.
5-49